110/120 Volt

New Lamb Ametek 114560 vacuum motor is 2-stage, 7.5 inch, 120 volt.

Uses complete motor brushes and holders part #MO516.

For carbon and spring motor brushes replacements use our part #MO528.

It is suggested you replace the motor gasket part #MO511.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 67.7 inches
• Maximum Air Watts: 321
• Maximum Air Flow: 142.3 CFM
• Motor Life Expectancy of 1000 hours
• 11 Inches In Height
• 7.5 Inches Wide

This is a special order motor.

New Lamb Ametek 114587 vacuum motor is 2-stage, 7.5 inch, 230 volt.

It is suggested you replace the motor gasket part #MO511.

 Description:

This single-phase, two-pole universal motor series is totally enclosed, externally fan-cooled, and is combined with a centrifugal blower to produce vacuum airflow characteristics suited for vacuum blower applications. The motor is a 230 volt AC motor and incorporates class B insulation in the armature and field windings.

The vacuum air is drawn into the bottom of the fan case and is discharged through openings between the upper and lower mounting flanges. Motor cooling air is drawn in the top of the die cast aluminum shell and is directed over the outside of the enclosed motor. An internal fan circulates air through the electrical parts to properly transfer heat to the outside housing of the motor.

Application:

This motor has been listed by Underwriters Laboratories Inc. Guide PTDR, File E-25653 for use in hazardous locations with respect to safety of operation as follows:

Class I, Group D--Atmospheres containing gasoline,petroleum, naphtha, benzene, butane, propane,alcohols,acetone, benzol, lacquer solvent vapors, or natural gas.

Class II, Group E--Atmospheres containing metal dust,including magnesium, aluminum, and their commercial alloys.

Class II, Group F--Atmospheres containing carbon black,coal, or coke dust.

Class II, Group G--Atmospheres containing flour, starch,or grain dusts.

Note:

These motors are designed for use in commercial and industrial vacuum equipment which employ filters to remove dirt from the air stream before reaching the vacuum fans. While these vacuum motors are listed for use in hazardous locations, that in itself does not mean that the end product has hazardous duty characteristics. The design of the equipment must be evaluated by Underwriters Laboratories Inc. or other listing or regulatory agency to determine if the end product is suitable for use in hazardous locations.

When using AMETEK Lamb Electric bypass motors in machines that come in contact with foam, liquid (including water),or other foreign substances, the machine must be designed and constructed to prevent those substances from reaching the fan system, motor housing and electrical components. Lamb Electric vacuum motors other than hazardous duty models should not be applied in machines that come in contact with dry chemicals or other volatile materials. Failure to observe these precautions could cause flashing (depending on volatility) or electrical shock which could result in property damage and severe bodily injury, including death in extreme cases. All applications incorporating Lamb Electric motors should be submitted to appropriate organizations or agencies for testing specifically related to the safety of your equipment.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 58.0 inches
• Maximum Air Watts: 241
• Maximum Air Flow: 129.9 CFM
• Maximum Amps: 4.7
• Motor Life Expectancy of 1000 hours
• 11 Inches In Height
• 7.5 Inches Wide

This is a special order motor.

New Lamb Ametek 114787 vacuum motor is 3-stage, 7.5 inch, 120 volt.

Replaces obsolete motors 115218, 14823 and 14712.

It is suggested you replace the motor gasket part #MO511.

Uses complete motor brushes and holders part #MO516.

For carbon and spring motor brushes replacements use our part #MO528.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 88.1 inches
• Maximum Air Watts: 359
• Maximum Air Flow: 126.4 CFM
• Motor Speed: 11,960 RPM

To see the Ametek Product Bulletin that shows performance and application information in a PDF format see 114787. (Adobe PDF)

This vacuum motor is obsolete and has been replaced by motor part #MO108.

This Lamb Ametek 115407 motor is obsolete and has been replaced by motor part #MO183.

This Lamb Ametek 115441 motor is obsolete and has been replaced by motor part #MO108.

This Lamb Ametek 115472 motor is obsolete and has been replaced by motor part #MO249.

This Lamb Ametek 115639 motor is obsolete and has been replaced by motor part #MO108.

This Lamb Ametek 115729 motor is obsolete and has been replaced by motor part #MO183.

New Lamb Ametek 115744 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested your replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 92 inches
• Maximum Air Watts: 257
• Maximum Air Flow: 99 CFM
• Motor Speed: 18,054 RPM

New Lamb Ametek 115757P motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 96 inches
• Maximum Air Watts: 292
• Maximum Air Flow: 96 CFM
• Motor Speed: 18,034 RPM

This Lamb Ametek 116507 motor is obsolete and has been replaced by motor part #MO121.

Uses motor brushes part #MO503.

This Lamb Ametek 115922 motor is obsolete and has been replaced by motor part #MO117.

New Lamb Ametek 115937 motor is 2-stage, 7.2 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO500.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 110 inches
• Maximum Air Watts: 392
• Maximum Air Flow: 105.4 CFM
• Motor Speed: 17,200 RPM

New Lamb Ametek 115982 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 96.4 inches
• Maximum Air Watts: 356
• Maximum Air Flow: 115 CFM
• Overall height 5 13/16 inches

New Lamb Ametek 116024-13 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 84.9 inches
• Maximum Air Watts: 225
• Maximum Air Flow: 97 CFM
• Motor Speed: 22,332 RPM

New Lamb Ametek 116039-13 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 77.9 inches
• Maximum Air Watts: 238
• Maximum Air Flow: 96.4 CFM
• Motor Speed: 21,593 RPM

New Lamb Ametek 116114-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 91.3 inches
• Maximum Air Watts: 300
• Maximum Air Flow: 104 CFM
• Motor Speed: 19,194 RPM

New Lamb Ametek 116118-00 motor is 3-stage, 7.2 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO500.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 131.4 inches
• Maximum Air Watts: 447
• Maximum Air Flow: 105 CFM
• Motor Speed: 19,450 RPM

New Lamb Ametek 116137-00 motor is 3-stage, 7.2 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO500.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 131.4 inches
• Maximum Air Watts: 447
• Maximum Air Flow: 105 CFM
• Motor Speed: 17,220 RPM

New Lamb Ametek 116146-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 100.6 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 121.6 CFM
• Motor Speed: 25,373 RPM

This Lamb Ametek 116179-00 motor is obsolete and has been replaced by motor part #MO286.

New Lamb Ametek 116196-00 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 49.5 inches
• Maximum Air Watts: 291
• Maximum Air Flow: 133 CFM
• Motor Speed: 23,125 RPM

New Lamb Ametek 116207-00 motor is 2-stage, 5.7 inch, 120 volt.

Replaces obsolete motor #115880.

If you have a 116207-00 you can use this as a replacement motor.

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 91.3 inches
• Maximum Air Watts: 300
• Maximum Air Flow: 104 CFM
• Motor Speed: 19,194 RPM

New Lamb Ametek 116210-85 motor is 2-stage, 5.7 inch, 120 volt.

This motor has 1 7/8 inch tube on the base of the motor.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 97.4 inches
• Maximum Air Watts: 304
• Maximum Air Flow: 99.1 CFM
• Motor Speed: 18,034 RPM

New Lamb Ametek 116227-00 motor is 2-stage, 5.7 inch, 120 volt.

Replaces obsolete and less powerful motors 115265 and 115736.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 106.9 inches
• Maximum Air Watts: 316
• Maximum Air Flow: 107 CFM
• Motor Speed: 20,100 RPM

New Lamb Ametek 116297-00 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 60.6 inches
• Maximum Air Watts: 227
• Maximum Air Flow: 123 CFM
• Motor Speed: 27,390

This Lamb Ametek 116304 motor is obsolete and has been replaced by motor part #MO139.

New Lamb Ametek 116309-00 metal motor is a 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO522.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 63 inches
• Maximum Air Watts: 190
• Maximum Air Flow: 112 CFM
• Motor Speed: 22,280

   

New Lamb Ametek 116311-01 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 91.2 inches
• Maximum Air Watts: 245
• Maximum Air Flow: 95 CFM
• Motor Speed: 18,390 RPM

New Lamb Ametek 116336-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 83.4 inches
• Maximum Air Watts: 274
• Maximum Air Flow: 94 CFM
• Motor Speed: 18,225 RPM

New Lamb Ametek 116378-00 motor is 2-stage, 4.3 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 76 inches
• Maximum Air Watts: 181
• Maximum Air Flow: 94.7 CFM
• Motor Speed: 22,950 RPM

New Lamb Ametek 116429 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball/Sleeve Bearing
• Sealed Vacuum: 97.2 inches
• Maximum Air Watts: 362
• Maximum Air Flow: 121.2 CFM
• Maximum Amps: 9.4
• Motor Speed: 25,350 RPM

New Lamb Ametek 116448-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Uses motor brushes part #MO503.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 92.5 inches
• Maximum Air Watts: 301
• Maximum Air Flow: 97.4 CFM
• Maximu Amps: 9.6
• Motor Speed: 19,367 RPM

New Lamb Ametek 116457-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 90.2 inches
• Maximum Air Watts: 241
• Maximum Air Flow: 94 CFM
• Motor Speed: 18,093 RPM

New Lamb Ametek 116471 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 106.7 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 112 CFM
• Maximum Amps: 11.4
• Motor Speed: 20,350 RPM

New Lamb Ametek 116472-29 motor is 2-stage, 5.7 inch, 120 volt.

This motor has 1 1/ inch tube on the base of the motor.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 106.7 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 112 CFM
• Motor Speed: 20,350 RPM

This is a special order motor.

New Lamb Ametek 116493-50 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Uses motor brushes part #MO503.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 108.6 inches
• Maximum Air Watts: 412
• Maximum Air Flow: 113.5 CFM
• Maximum Amps: 9.0
• Motor Speed: 22,333 RPM

New Lamb Ametek 116520-50 metal motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO522.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 47.8 inches
• Maximum Air Watts: 156
• Maximum Air Flow: 92.6 CFM
• Motor Speed: 19,625 RPM

New Lamb Ametek 116551-50 motor is 2-stage, 4.8 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 76.5 inches
• Maximum Air Watts: 214
• Maximum Air Flow: 87.7 CFM
• Motor Speed: 19,900 RPM

New Lamb Ametek 116565-29 motor is 3-stage, 5.7 inch, 120 volt.

This motor has a 1 1/2 inch tube on the base of the motor.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brush part #MO515.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 117.4 inches
• Maximum Air Watts: 368
• Maximum Air Flow: 99 CFM
• Maximum Amps: 10.70
• Motor Speed: 22,200 RPM

New Lamb Ametek 116579-00 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 81.2 inches
• Maximum Air Watts: 341
• Maximum Air Flow: 127.2 CFM
• Motor Speed: 31,297

New Lamb Ametek 116662-49 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 78.8 inches
• Maximum Air Watts: 362
• Maximum Air Flow: 135.1 CFM

New Lamb Ametek 116671-50 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 100 inches
• Maximum Air Watts: 321
• Maximum Air Flow: 104 CFM
• Motor Speed: 20,400 RPM

New Premier Lamb Ametek 116758-11 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 91.5 inches
• Maximum Air Watts: 293
• Maximum Air Flow: 103 CFM
• Motor Speed: 23,436 RPM

New Lamb Ametek 116763 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 107.1 inches
• Maximum Air Watts: 387
• Maximum Air Flow: 110 CFM
• Motor Speed: 21,110 RPM

New Lamb Ametek 116765-13 motor is a 3-stage, 5.7 inch, 120 volt.

If you have a 116765-00 or a 116765-07 you can use this as a replacement motor.

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. It MUST say 116765-13 to be a sealed bearing not just 116765!

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brush part #MO515.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 136 inches
• Maximum Air Watts: 368
• Maximum Air Flow: 95.3 CFM
• Maximum Amp's: 13.1
• Motor Speed: 17,700 RPM

New Lamb Ametek 116845-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part ##MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 114.4 inches
• Maximum Air Watts: 365
• Maximum Air Flow: 101.3 CFM
• Motor Speed: 22,642 RPM

New Lamb Ametek 116883-00 motor is a 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 91.2 inches
• Maximum Air Watts: 245
• Maximum Air Flow: 95 CFM
• Motor Speed: 18,390 RPM

New Lamb Ametek 116884-49 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 96.4 inches
• Maximum Air Watts: 356
• Maximum Air Flow: 115 CFM
• Maximum Amps: 9.5
• Motor Speed: 23,700 RPM

New Lamb Ametek 117073-00 motor is 2-stage, 5.7 inch, 120 volt.

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Special order motor.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 101.3 inches
• Maximum Air Watts: 353
• Maximum Air Flow: 110.6 CFM
• Motor Speed: 26,260 RPM

New Lamb Ametek 117076-50 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO503.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 49.5 inches
• Maximum Air Watts: 291
• Maximum Air Flow: 133 CFM
• Maximum Amps: 7.0
• Motor Speed: 23,125 RPM

New Lamb Ametek 117354 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO514.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 87.57 inches
• Maximum Air Watts: 378.5
• Maximum Air Flow: 131.5 CFM
• Maximum amps:10.32
• Motor Speed: 33,157 RPM

New Lamb Ametek 117465-13 motor is 2-stage, 7.2 inch, 110-120 volt.

If you have a 117465-00 you can use this as a replacement motor. 

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

This motor replaces obsolete motor #115472, 116465 and 115210.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO505.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 112.8 inches
• Maximum Air Watts: 396
• Maximum Air Flow: 107 CFM
• Motor Speed: 19,150 RPM

New Lamb Ametek 117470-12 motor is 3-stage, 7.2 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO507.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 135 inches
• Maximum Air Watts: 426
• Maximum Air Flow: 98.5 CFM
• Maximum Amps: 13.0
• Motor Speed: 19,120 RPM

New Lamb Ametek 117507-00 motor is 3-stage, 7.2 inch, 120 volt.

Replaces obsolete motor #116507.

Uses motor brushes part #MO505.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 134.1 inches
• Maximum Air Watts: 406
• Maximum Air Flow: 94 CFM
• Maximum Amp's: 12.7
• Motor Speed: 17,200 RPM

New Lamb Ametek 117549-12 motor is 2-stage, 7.2 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO507.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 125.4 inches
• Maximum Air Watts: 483
• Maximum Air Flow: 111.4 CFM
• Maximum Amps: 13.5
• Motor Speed: 17,838 RPM

New Lamb Ametek 117576-00 motor is a 1-stage, 5.1 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 81.6 inches
• Maximum Air Watts: 371
• Maximum Air Flow: 128.9 CFM
• Motor Speed: 27,782 RPM

New Lamb Ametek 117795-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 111 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 111.9 CFM
• Motor Speed: 20,350 RPM

New Lamb Ametek 117923-23 motor is 2-stage, 5.7 inch, 110-120 volt.

This is a replacement for the Miele vacuums. NO OTHER MOTOR WILL WORK!

This motor has a small lips on the bottom of the motor to fit correctly into your vacuum. All others do not!

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 94 inches
• Maximum Air Watts: 447
• Maximum Air Flow: 124 CFM
• Maximum Amps: 10.80
• Motor Speed: 27,960 RPM

New Lamb Ametek 119292-00 motor is a 4-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brush part #MO515.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 170.9 inches
• Maximum Air Watts: 301
• Maximum Air Flow: 59.2 CFM
• Maximum Amp's: 12.70
• Motor Speed: 23,215 RPM

This is a special order motor.

New Lamb Ametek 119347 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO533.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Ball Bearing
• Sealed Vacuum: 98.1 inches
• Maximum Air Watts: 489
• Maximum Air Flow: 147.3 CFM
• Maximum Amps: 11.60
• Motor Speed: 35,510

New Lamb Ametek 119402-00 motor is 2-stage, 5.7 inch, 120 volt.

Replaces obsolete motor numbers 11450 and 114750.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO504.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 91.2 inches
• Maximum Air Watts: 245
• Maximum Air Flow: 95 CFM
• Motor Speed: 18,390 RPM

New Lamb Ametek 119407-13 motor is 2-stage, 5.7 inch, 120 volt.

If you have a 119407-00  you can use this as a replacement motor. 

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 106.7 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 112 CFM
• Motor Speed: 20,350 RPM

New Lamb Ametek 119411-00 motor is 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO522.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 63 inches
• Maximum Air Watts: 190
• Maximum Air Flow: 112 CFM
• Motor Speed: 26,875 RPM

New Lamb Ametek 119413-13 motor is 2-stage, 5.7 inch, 120 volt.

Replaces obsolete and less powerful motors #115407, 115477 and 116444.

If you have a 119413-00  you can use this as a replacement motor. 

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO504.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 84.9 inches
• Maximum Air Watts: 255
• Maximum Air Flow: 97 CFM
• Motor Speed: 18,054 RPM

This vacuum motor is obsolete and has been replaced by motor part #MO296.

For motor brushes for the 119489-00 use motor brushes part #MO514.

New Lamb Ametek 119514-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

If you need motor brushes please see part #MO501.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 80.9 inches
• Maximum Air Watts: 248
• Maximum Air Flow: 95.3 CFM
• Motor Speed: 20,740 RPM

New Lamb Ametek 119631-00 conical design motor is 2-stage, 5.7 inch, 120 volt.

It has more than a 1/2" taper at the bottom (see additional picture).

Replaces the old Ametek motor #119708 motor which is less powerful.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO523.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 128 inches
• Maximum Air Watts: 515
• Maximum Air Flow: 114.5 CFM
• Maximum Amp usage 14.4
• Motor Speed: 28,743 RPM

New Lamb Ametek 119633-07 conical design motor is 2-stage, 5.7 inch, 120 volt.

It has more than a 1/2" taper at the bottom.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO523.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 125.3 inches
• Maximum Air Watts: 515
• Maximum Air Flow: 112.9 CFM
• Maximum Amp usage 14.2
• Motor Speed: 27,990 RPM

New Lamb Ametek 119913-07 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO576.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 124.8 inches
• Maximum Air Watts: 493
• Maximum Air Flow: 120.8 CFM
• Maximum amps: 14.00
• Motor Speed: 29,136 RPM

New Lamb Ametek Premier 119916-12 motor is 2-stage, 7.2 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 141.4 inches
• Maximum Air Watts: 595
• Maximum Air Flow: 120.2 CFM
• Maximum Amps: 15.8
• Motor Speed: 27,250 RPM

This is a special order motor.

New Lamb Ametek 119953 motor is a 1-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO501.

Motor Specs

• Motor Type: Acustek
• Discharge: Bypass
• Bearings: Double Ball Bearing
• Sealed Vacuum: 89.5 inches
• Maximum Air Watts: 405
• Maximum Air Flow: 137 CFM
• Maximum Amps: 12.5
• Motor Speed: 33,285 RPM

New Lamb Ametek 119992-00 conical design motor is 2-stage, 5.7 inch, 120 volt.

It has more than a 1/2" taper at the bottom (see picture).

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO576.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 141.3 inches
• Maximum Air Watts: 577
• Maximum Air Flow: 126.2 CFM
• Maximum Amps: 15.6
• Motor Speed: 32,234

New Lamb Ametek Premier 122031-12 motor is 2-stage, 7.2 inch, 115 volt only.

It is suggested you replace the motor gasket part #MO511.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 131.5 inches
• Maximum Air Watts: 616
• Maximum Air Flow: 124.6 CFM
• Maximum Amps: 16.1
• Motor Speed: 29,330 RPM

New Lamb Ametek 122042-00 motor is 2-stage, 5.7 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 98.2 inches
• Maximum Air Watts: 311
• Maximum Air Flow: 92.9 CFM
• Maximum Amp's: 7.3
• Motor Speed: 25,080 RPM

This is a special order motor.

New Lamb Ametek 122055-00 vacuum motor is 2-stage, 7.5 inch, 120 volt.

It is suggested you replace the motor gasket part #MO511.

This is Ametek's hazardous-duty motor and is a 7.5-inch diameter, 2-stage, peripheral bypass vacuum motor. The single-phase, two-pole universal motor series is totally enclosed, externally fan-cooled. That motor is combined with a centrifugal blower to produce vacuum airflow characteristics suited for vacuum blower applications. The motor is available in 120-volt AC models and incorporate class B insulation in the armature and field windings.

The motor have been listed by Underwriters Laboratories Inc. Guide PTDR, File E-25653 for use in hazardous locations with respect to safety of operation as follows: Class I, Group D--Atmospheres containing gasoline, petroleum, naphtha, benzene, butane, propane, alcohols, acetone, benzol, lacquer solvent vapors, or natural gas. Class II, Group E--Atmospheres containing metal dust, including magnesium, aluminum, and their commercial alloys. Class II, Group F--Atmospheres containing carbon black, coal, or coke dust. Class II, Group G--Atmospheres containing flour, starch, or grain dusts.

The motor is designed for use in commercial and industrial vacuum equipment which employ filters to remove dirt from the air stream before reaching the vacuum fans. While these vacuum motors are listed for use in hazardous locations, that in itself does not mean that the end product has hazardous duty characteristics. The design of the equipment must be evaluated by Underwriters Laboratories Inc. or other listing or regulatory agency to determine if the end product is suitable for use in hazardous locations.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 1473 mm
• Maximum Air Watts: 227
• Maximum Air Flow: 59.7 liters per second
• Maximum Amps: 4.7
• Motor Life Expectancy of 1000 hours

This is a special order motor.

New Lamb Ametek 122094-00 motor is 2-stage, 4.3 inch, 120 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 113.2 inches
• Maximum Air Watts: 538
• Maximum Air Flow: 116.8 CFM
• Maximum Amp's: 12.1
• Motor Speed: 44,794 RPM

New Lamb Ametek 121133-00 motor is a brushless, 1-stage, tapered fan system, 8.4 inch, 120 volt high efficiency motor.

It is suggested you replace the motor gasket Part #MO511.

Special features:

• 1500 plus hours of operational use. Three times that of ordinary motors
• Up to 45% more efficient that standard tangential motors
• High efficiency cooling fan
• Improved sound quality for a less operational noise
• Same mounting pattern as a standard Ametek 7.2" tangential bypass motor
• High efficiency laminated fans for moisture protection
• UL recognized, category PRQY2 (E47188)
• Uses Ametek Lamb "Green Label Power" for high efficiency using less power

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Power: 120 volt AC only
• Bearings: Double Ball Bearing with large 10 mm bearings for extra protection and smooth running
• Sealed Vacuum: 110 inches
• Maximum Air Watts: 717
• Maximum Air Flow: 166.2 CFM
• Maximum amp draw at start-up 15.1
• Motor Speed: 34,200 RPM
• Measures 6.00 inches tall and 9.2 inches wide (discharge tube not included)

Design Application:

• Commercial or residential central vacuum systems
• Car wash vacuums and blower systems
• Equipment operating in environments requiring separation of working air from motor ventilation air
• Designed to handle clean, dry, filtered air ONLY!

New Lamb Ametek 122167-00 motor is 1-stage, 4.3 inch, 120 volt.

THIS MOTOR HAS A THERMAL PROTECTION SYSTEM BUILT IN!

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 113.2 inches
• Maximum Air Watts: 538
• Maximum Air Flow: 116.8 CFM
• Maximum Amp's: 12.1
• Motor Speed: 44,794 RPM

New Lamb Ametek 121175-00 motor is a brushless, 2-stage, tapered fan system, 8.4 inch, 120 volt high efficiency motor.

It is suggested you replace the motor gasket Part #MO511.

Special features:

• 1500 plus hours of operational use. Three times that of ordinary motors
• Up to 45% more efficient that standard tangential motors
• High efficiency cooling fan
• Improved sound quality for a less operational noise
• Same mounting pattern as a standard Ametek 7.2" tangential bypass motor
• High efficiency laminated fans for moisture protection
• UL recognized, category PRQY2 (E47188)
• Uses Ametek Lamb "Green Label Power" for high efficiency using less power

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Power: 120 volt AC only
• Bearings: Double Ball Bearing with large 10 mm bearings for extra protection and smooth running
• Sealed Vacuum: 146.6 inches
• Maximum Air Watts: 673
• Maximum Air Flow: 141.5 CFM
• Maximum amp draw at start-up 13.7
• Motor Speed: 21,890 RPM
• Measures 6.25 inches tall and 9.2 inches wide (discharge tube not included)

Design Application:

• Commercial or residential central vacuum systems
• Car wash vacuums and blower systems
• Equipment operating in environments requiring separation of working air from motor ventilation air
• Designed to handle clean, dry, filtered air ONLY!

This is a special order item.  Please allow additional 3 - 4 weeks for shipping.

New Lamb Ametek 122234-18 motor is 2-stage, 6.6 inch, 120 volt.

It has more than a 1/2" taper at the bottom (see additional picture).

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 131.5 inches
• Maximum Air Watts: 625
• Maximum Air Flow: 138.8 CFM
• Maximum Amp's: 14
• Motor Speed: 29,331 RPM

Special Features

• 1500+ hours life (curved brush)
• High efficient cooling system
• Up to 41% Overall Efficiency
• Lamb "Green Power Label"

Design Applications

• Commercial and Residential Central Cleaning Systems
• Car wash vac and blower systems
• Equipment operating in environments requiring separation of working air from motor ventilating air.
• Designed to handle clean, dry, filtered air only

This is a special order motor.