220/230/240 Volt

New Lamb Ametek 114589 vacuum motor is 2-stage, 7.5 inch, 230 volt.

It is suggested you replace the motor gasket part #MO511.

 Description:

This single-phase, two-pole universal motor series is totally enclosed, externally fan-cooled, and is combined with a centrifugal blower to produce vacuum airflow characteristics suited for vacuum blower applications. The motor is a 230 volt AC motor and incorporates class B insulation in the armature and field windings.

The vacuum air is drawn into the bottom of the fan case and is discharged through openings between the upper and lower mounting flanges. Motor cooling air is drawn in the top of the die cast aluminum shell and is directed over the outside of the enclosed motor. An internal fan circulates air through the electrical parts to properly transfer heat to the outside housing of the motor.

Application:

This motor has been listed by Underwriters Laboratories Inc. Guide PTDR, File E-25653 for use in hazardous locations with respect to safety of operation as follows:

Class I, Group D--Atmospheres containing gasoline,petroleum, naphtha, benzene, butane, propane,alcohols,acetone, benzol, lacquer solvent vapors, or natural gas.

Class II, Group E--Atmospheres containing metal dust,including magnesium, aluminum, and their commercial alloys.

Class II, Group F--Atmospheres containing carbon black,coal, or coke dust.

Class II, Group G--Atmospheres containing flour, starch,or grain dusts.

Note:

These motors are designed for use in commercial and industrial vacuum equipment which employ filters to remove dirt from the air stream before reaching the vacuum fans. While these vacuum motors are listed for use in hazardous locations, that in itself does not mean that the end product has hazardous duty characteristics. The design of the equipment must be evaluated by Underwriters Laboratories Inc. or other listing or regulatory agency to determine if the end product is suitable for use in hazardous locations.

When using AMETEK Lamb Electric bypass motors in machines that come in contact with foam, liquid (including water),or other foreign substances, the machine must be designed and constructed to prevent those substances from reaching the fan system, motor housing and electrical components. Lamb Electric vacuum motors other than hazardous duty models should not be applied in machines that come in contact with dry chemicals or other volatile materials. Failure to observe these precautions could cause flashing (depending on volatility) or electrical shock which could result in property damage and severe bodily injury, including death in extreme cases. All applications incorporating Lamb Electric motors should be submitted to appropriate organizations or agencies for testing specifically related to the safety of your equipment.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 58.0 inches
• Maximum Air Watts: 241
• Maximum Air Flow: 129.9 CFM
• Maximum Amps: 4.7
• Motor Life Expectancy of 1000 hours
• 11 Inches In Height
• 7.5 Inches Wide

This is a special order motor.

New Lamb Ametek 114789 motor is 3-stage, 7.5 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO517.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 84.5 inches
• Maximum Air Watts: 354
• Maximum Air Flow: 122 CFM
• Motor Speed: 11,450 RPM

New Lamb Ametek 115684 motor is 2-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO506.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 110 inches
• Maximum Air Watts: 338
• Maximum Air Flow: 97.8 CFM
• Motor Speed: 16,005 RPM

New Lamb Ametek 115765 motor is 2-stage, 5.7 inch, 240 volt.

If you have a 115765-00 you can use this as a replacement motor. 

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve

New Lamb Ametek 115950 motor is 2-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO506.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 119.2 inches
• Maximum Air Watts: 390
• Maximum Air Flow: 107.9 CFM
• Motor Speed: 17,130 RPM

New Lamb Ametek 115963 motor is 2-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO500.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 104.6 inches
• Maximum Air Watts: 375
• Maximum Air Flow: 114.6 CFM
• Maximum Amps: 5.5
• Motor Speed: 16,535 RPM

New Lamb Ametek 116036-13 motor is 2-stage, 5.7 inch, 240 volt.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 94.2 inches
• Maximum Air Watts: 349
• Maximum Air Flow: 110.5 CFM
• Motor Speed: 19,990 RPM

New Lamb Ametek 116040-13 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 90.5 inches
• Maximum Air Watts: 349
• Maximum Air Flow: 103.2 CFM
• Motor Speed: 23,880 RPM

New Lamb Ametek 116110 motor is 2-stage, 5.7 inch, 240 volt.

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 97.8 inches
• Maximum Air Watts: 355.1
• Maximum Air Flow: 102.7 CFM
• Motor Speed: 19,767 RPM

New Lamb Ametek 116117-00 motor is 3-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO506.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 121.9 inches
• Maximum Air Watts: 352
• Maximum Air Flow: 92.9 CFM
• Motor Speed: 16,453 RPM

New Lamb Ametek 116136-00 motor is 3-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO506.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 114.9 inches
• Maximum Air Watts: 339
• Maximum Air Flow: 91.8 CFM
• Motor Speed: 19,714 RPM

New Lamb Ametek 116154-00 motor is 3-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 129 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 97 CFM

New Lamb Ametek 116213-00 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 97.4 inches
• Maximum Air Watts: 304
• Maximum Air Flow: 99.1 CFM
• Motor Speed: 24,160 RPM

New Lamb Ametek 116296-13 motor is 2-stage, 5.7 inch, 240 volt.

If you have a 116296-00  you can use this as a replacement motor.

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life. It MUST say 116296-13 to be a sealed bearing.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 94.2 inches
• Maximum Air Watts: 349
• Maximum Air Flow: 110.5 CFM
• Motor Speed: 19,990 RPM

New Lamb Ametek 116312-00 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Through flow
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 98.6 inches
• Maximum Air Watts: 281
• Maximum Air Flow: 106.5 CFM
• Maximum Amps: 4.2
• Motor Speed: 19,255 RPM

New Lamb Ametek 116344-00 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 100.9 inches
• Maximum Air Watts: 329
• Maximum Air Flow: 110.8 CFM
• Maximum Amps: 4.7
• Motor Speed: 25,885 RPM

New Lamb Ametek 116353-00 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 94 inches
• Maximum Air Watts: 358
• Maximum Air Flow: 113.2 CFM
• Motor Speed: 23,456 RPM

New Lamb Ametek 116420 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 92.1 inches
• Maximum Air Watts: 315
• Maximum Air Flow: 106.8 CFM
• Motor Speed: 19,324 RPM

New Lamb Ametek 116549-13 motor is 2-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

ACUSTEK technology is a Lamb Electric exclusive on its low noise-peripheral bypass discharge vacuum motors.

Motor Specs

• Motor Type: Bypass
• Discharge: Acustek
• Bearings: Double Ball Bearing
• Sealed Vacuum: 90.6 inches
• Maximum Air Watts: 332
• Maximum Air Flow: 116 CFM
• Motor Speed: 19,357 RPM

New Lamb Ametek 116668-50 motor is 1-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 67 inches
• Maximum Air Watts: 219
• Maximum Air Flow: 110.8 CFM
• Motor Speed: 23,071 RPM

This Lamb Ametek 116859 motor has been replaced by motor part #MO300.

Uses motor brushes part #MO508.

New Lamb Ametek 116882-50 motor is 1-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Ball Bearing/Sleeve
• Sealed Vacuum: 68.2 inches
• Maximum Air Watts: 223
• Maximum Air Flow: 113.9 CFM
• Motor Speed: 23,889 RPM

New Lamb Ametek 117123-00 motor is 3-stage, 5.7 inch, 240 volt.

Replaces the old and less powerful motor #116859.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO502.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 137.1 inches
• Maximum Air Watts: 448
• Maximum Air Flow: 95.1 CFM
• Motor Speed: 20,400 RPM

New Lamb Ametek 117501-12 motor is 3-stage, 7.2 inch, 230 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO509.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 147.1 inches
• Maximum Air Watts: 562
• Maximum Air Flow: 104.1 CFM
• Maximum amps:7.4
• Motor Speed: 24,620 RPM

New Lamb Ametek 117525-00 motor is 2-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO510.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 114.2 inches
• Maximum Air Watts: 404
• Maximum Air Flow: 103.4 CFM
• Maximim amps: 6.10
• Motor Speed: 23.800 RPM

New Lamb Ametek 117743 motor is 3-stage, 7.2 inch, 240 volt.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO510.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 129.5 inches
• Maximum Air Watts: 373
• Maximum Air Flow: 89.2 CFM
• Motor Speed: 18,000 RPM

New Lamb Ametek 119401-00 motor is 1-stage, 5.7 inch, 240 volt.

This motor reaplces obsolete motor #115755.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO521.

Motor Specs

• Motor Type: Thru Flow
• Discharge: Peripheral
• Bearings: Double Ball Bearing
• Sealed Vacuum: 69.3 inches
• Maximum Air Watts: 225
• Maximum Air Flow: 117 CFM
• Motor Speed: 23,494 RPM

New Lamb Ametek 119490-00 motor is 1-stage, 5.7 inch, 240 volt.

It is suggested you replace the motor gasket part #MO512.

Protect your motors from dust and dirt by using a motor filter. This prolongs the life of your motor and is a must for all motors. See our part #MO553.

Uses motor brushes part #MO508.

Motor Specs

• Motor Type: Bypass
• Discharge: Thruflow
• Bearings: Double Ball Bearing
• Sealed Vacuum: 95.1 inches
• Maximum Air Watts: 440
• Maximum Air Flow: 134.8 CFM
• Maximum Amps: 6.10
• Motor Speed: 34,935 RPM

New Lamb Ametek 119599-12 motor is 3-stage, 7.2 inch, 240 volt.

If you have a 119599-12 you can use this as a replacement motor. 

This motor has sealed bearings in it so dust and dirt will not get into the system. This allows for a longer motor life.

It is suggested you replace the motor gasket part #MO511.

Uses motor brushes part #MO509.

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 147.16 inches
• Maximum Air Watts: 492
• Maximum Air Flow: 105.6 CFM
• Maximum Amps: 7.8
• Motor Speed: 19,890

New Lamb Ametek 121165-00 motor is a brushless, 1-stage, tapered fan system, 8.4 inch, 240 volt high efficiency motor.

It is suggested you replace the motor gasket Part #MO511.

Special features:

• 1500 plus hours of operational use. Three times that of ordinary motors
• Up to 45% more efficient that standard tangential motors
• High efficiency cooling fan
• Improved sound quality for a less operational noise
• Same mounting pattern as a standard Ametek 7.2" tangential bypass motor
• High efficiency laminated fans for moisture protection
• UL recognized, category PRQY2 (E47188)
• Uses Ametek Lamb "Green Label Power" for high efficiency using less power

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Power: 240 volt AC only
• Bearings: Double Ball Bearing with large 10 mm bearings for extra protection and smooth running
• Sealed Vacuum: 115.3 inches
• Maximum Air Watts: 706
• Maximum Air Flow: 171.7 CFM
• Maximum amp draw at start-up 7.8
• Motor Speed: 34.830 RPM
• Measures 6.00 inches tall and 9.2 inches wide (discharge tube not included)

Design Application:

• Commercial or residential central vacuum systems
• Car wash vacuums and blower systems
• Equipment operating in environments requiring separation of working air from motor ventilation air
• Designed to handle clean, dry, filtered air ONLY!

New Lamb Ametek 122236-18 motor is 2-stage, 6.6 inch, 230 volt.

It has more than a 1/2" taper at the bottom (see additional picture).

Motor Specs

• Motor Type: Bypass
• Discharge: Tangential
• Bearings: Double Ball Bearing
• Sealed Vacuum: 133.9 inches
• Maximum Air Watts: 646
• Maximum Air Flow: 139.9 CFM
• Maximum Amp's: 7.4
• Motor Speed: 29,652 RPM

Special Features

• 1500+ hours life (curved brush)
• High efficient cooling system
• Up to 41% Overall Efficiency
• Lamb "Green Power Label"

Design Applications

• Commercial and Residential Central Cleaning Systems
• Car wash vac and blower systems
• Equipment operating in environments requiring separation of working air from motor ventilating air.
• Designed to handle clean, dry, filtered air only

This is a special order motor.