| |
|
Product Information |
Price |
| |
 |
Model #: FI123
TORNADOPOWER central vacuum system maintenance cleaning cloths are the perfect way to care for your central vacuum system. These specially-formulated cloths reduce odors, maintain, and revitalize your entire central vacuum system, including inlets, piping, and the vacuum canister. The barbed side of the cloths gently scrub your vacuum hose and pipe while the smooth applies a fresh, clean scent to your entire system. Comes with 25 pre-moistened pop-up cloths that you can vacuum through each inlet valve using you hose and wands.
Here are some FAQ's:
Why should I use TORNADOPOWER cloths?
Your central vacuum system represents one of the most significant investments you will make in your home. In addition, it is also an important contributor to your family's health and well-being. With proper care, your central vacuum system should provide years of trouble-free use. TORNADOPOWER is one of the simplest and most effective ways to clean and maintain your central vacuum system.
What do TORNADOPOWER cloths do for your system?
TORNADOPOWER textured cloths are specially formulated to capture dirt and grime residue that exists in the hose and pipe of your central vacuum system. Also, when pulled through the pipe system, these cloths capture larger debris such as pebbles, lint, sticks, etc. and deliver these items to the canister. Finally, the treated cloths "wipe down" the inside walls of hoses and pipes, and their scented solution leaves the entire system smelling clean and fresh.
Can I leave TORNADOPOWER cloths in the dirt receptacle?
The use of TORNADOPOWER cloths should in no way alter the central vacuum system manufacturer's recommended filling intervals. Used cloths can be left in the dirt receptacle and will continue to emit a clean, fresh scent.
How often should I use the TORNADOPOWER cloths in my central vacuum system?
We recommend you use them every time you change filter bags or clean out your dirt receptacle or as often as you like to keep your vacuum system in great condition and smelling great too!
View the Testing and Troubleshooting Guide. (Adobe PDF) |
|
|
| |
 |
Model #: FI903
Original 7 inch tall factory replacement filter #8106-01 for Vacuflo Models FC300, FC520, FC530, FC550, FC610 and FC650 systems.
Also fit Dirt Devil Pro Series models 390, 590, 690, 890, and 990 Dynamic central vacuums.
Fits Dirt Devil models CV1800, CV2000, CV2200, CV2400 and CV2600 central vacuums.
Factory replacement for the Titan TCS-5525 central vacuum systems.
Measures 7 inches tall and 6 1/4inch wide.
If you are looking for replacement filter for Vacuflo Model FC1550 see our part #FI902. |
|
|
| |
 |
Model #: FI902
Original 10 inch factory replacement filter part #8107-01 for Vacuflo Model FC1550.
Also fits the Dirt Devil Pro Series Model 1390, Dirt Devil model CV3200 and the Dirt Devil Platinum Force Models 499e, 599e, 699e, 799e, 1099e vacuum systems.
Is a factory replacment for the Titan TCS-8575 central vacuum as well as Royal model CS1200.
Measures 10 1/4 inches tall and 6 3/8 inches wide.
If you are looking for replacement filter for Vacuflo Models FC300, FC520, FC530, and FC610 systems see our part #FI903. |
|
|
| |
 |
Model #: FI900
This is a factory replacement style filter cartridge. Washable and reusable filter that measures 7 inches wide and 5 inches tall. Filter fits Hayden 2400, 3600, 6000, and Premier SuperVac.
Replaces factory part numbers 8744-00MTMH and 8744-00-WSH.
If you need the retainer to hold the filter in place see our part #FI908.
|
|
|
| |
 |
Model #: FI901
Designed for the Hoover Generation III central vacuum systems this is a factory style replacement filter. This filter measures almost 6 1/2 inches wide and is about 7 inches tall. Also fits Hoover Model S5675 vacuum system.
Replaces factory part number 38763-006. |
|
|
| |
 |
Model #: FI907
The cone shaped corrugated filter #5404004100 is a factory replacement for VacuQueen, FilterQueen, Health-Mor and MHI central vacuums.
Fits all the V1000 - V3000 series Vacu-Queen or FilterQueen Central Vacuum Systems manufactured by HMI.
Be sure to only use factory replacement filters only to maintain your warrantyand the best perfomance from your system. |
|
|
| |
 |
Model #: FI910
This is the Afuera Cleanstream HEPA cartridge filter factory part #110354 for the Electrolux Afuera central vacuum systems. Research has shown that the use of a central vacuum can relieve major allergy symptoms making your home a healthier place for your family. Afuera's washable CleanStream HEPA Filtration System shakes off dust to improve airflow and leaves you with extraordinarily high air quality. This Afuera cartridge filter removes 100% of contacted dust and allergens and has a true HEPA design. Because the Afuera is mounted outside of the living area there is no opportunity for dust to be recirculated within the house.
Fits Afuera CV3291, CV3291C, CV3391A, and CV3391D central vacuums.
Beware of companies selling Afuera knock off filters that are imported from China. These are factory filters!
Keep your warranty intact and use ONLY this Electrolux Afuera cartridge filter in you system.
Do NOT use a brush to clean this filter as it will damage it.
Measures 8.25 inches tall, 7.25 inches wide and the base opening measures 4.25 inches wide. |
|
|
| |
 |
Model #: FI415
This is a factory replacement Carbon Dust Motor Filter for the CycloVac GS and GX Series vacuums as well as the PowerStar Optima Plus and Utopia central vacuum systems.
It is VERY important to change your Carbon Dust Motor filter once for every three filter bags you change. It traps that harmful carbon dust produced by the motors that is normally deposited in the motor and on surfaces around the power unit. This will help protect the internal workings of the motor keeping it clean and providing longer service life for your motor. It's pleated design provides a substantial filtration surface, allowing for a maximum coverage and filtration durability as well as protecting the environment.
Filter measures 5 1/2 inches long, 2 inches wide, and 3/4 inches deep.
Comes two per pack. |
|
|
| |
 |
Model #: VU620
This is the factory replacement cartridge filter set for the Raycop UV Anti Bacterial Vacuum.
Raycop part #0A1918013-00.
Comes 3 per package |
|
|
| |
 |
Model #: VU630
This factory replacement micro filter is for the Raycop UV Anti Bacterial Vacuum.
Raycop part #A191-8014-000
Comes 1 per pack.
|
|
|
| |
 |
Model #: FI968
The 54617 is an optional microfilter that fits the Ghibli AS-5 canister vacuum. |
|
|
| |
 |
Model #: FI969
The 54268 is an optional HEPA filter that fits the Ghibli AS-5 canister vacuum. |
|
|
| |
 |
Model #: FI970
The 54461 is an optional microfilter that fits the Ghibli AS-6 canister vacuum. |
|
|
| |
 |
Model #: FI971
The 54672 is a replacement HEPA filter that fits the Ghibli AS-6 canister vacuum. |
|
|
| |
 |
Model #: FI972
* Free shipping on your entire order when you purchase this product!
The 54694 is an optional microfilter that fits the Ghibli ASL-10 canister vacuum. |
|
|
| |
 |
Model #: FI973
* Free shipping on your entire order when you purchase this product!
The 62970 is an optional microfilter that fits the Ghibli AS-400 canister vacuum. |
|
|
| |
 |
Model #: FI974
The 63025 is a complete filter that fits the Ghibli AS-10L canister vacuum. |
|
|
| |
 |
Model #: FI975
The 63080 is a complete filter that fits the Ghibli AS-400 canister vacuum. |
|
|
