Power Brushes

Cen-Tec has long been known for it's reliability and performance. The Cen-Tec CT-14DXQD Quiet Drive Electric Power brush is no exception. The Cen-Tec CT14DXQD power brush is the exact same power brush as the Hayden SuperPack Power brush as well as being used by Vacuflo as the Electroglide power brush, Whirlpool, Nutone CT600, Nutone BN190-02, Panasonic, and many others central vacuum manufacturers under their own label but has a NEW designed brush roll and belt drive for more quiet performance and much, much more cleaning efficiency! Not to mention a NEW more powerful motor! Sturdy and this reliable 14" wide brush is equipped with a timing belt driven agitating roller brush and a reset button to protect against stalls. This means many years of trouble free service. It has a full wrap around bumper to protect your base boards and furniture from scratches and mares. With a quick release latch and a four level height adjustment it is very easy to use. In addition it has a full faced light bar to illuminate darkened areas such as closets and under beds.

DO NOT ACCEPT THE OLDER CT14DX BRUSH!

We sell only the NEW Cen-Tec CT14DXQD that replaced the older CT14DX which is no longer made.

The CT14DXQD will work with all CT14DX equipment and will connect up perfectly!

Need a complete kit? For better value using the Cen-Tec CT-14DXQD power brush see our Cen-Tec Deluxe Pack part #CK319, which contains our XZ Dual Voltage Hose and all the tools you will need and gives you the best value.

If you need a replacement belt and the belt is cogged see our part #PB602.

If your belt is smooth see our part #PB622.

If you need a replacement headlight bulb see our part #PB620.

The Cen-Tec CT18DXQS QuietDrive Power Brush is a real workhorse. Sturdy and this reliable 14" wide brush is equipped Cen-Tec exclusive Dirt Sensor system that let's you know when the area is clean.

The CT-18DXQS is equipped with a timing belt driven agitating roller brush and a reset button to protect against stalls. This means many years of trouble free service. It has a full wrap around bumper to protect your base boards and furniture from scratches and mares. With a quick release latch and a four level height adjustment it is very easy to use. In addition it has a full faced light bar to illuminate darkened areas such as closets and under beds.

In addition incorporated in the power head is a dirt sensor (see picture) letting letting you know when the area is clean. The "RED" means the dirt is still passing through the wand, the "GREEN" means the area is clean and free of dirt.

This is the same power brush as the Ace Electric Brush ^TM from MD Manufacturing ^TM except our Cen-Tec CT18 has a patented Dirt Sensor which gives you better value at a less expensive cost!

Sophistication, performance, and quality, that is the Cen-Tec reputation.

Requires a Dirt Sensor wand.

If you need a replacement belt see our part #PB622.

This is one of the finest power brushes available today! The Wessel Werks EBK340 14" power brush is unsurpassed in performance and reliability. Uses the largest commercial grade motor available and uses the "Never-Fail" cogged fiberglass reinforced belt for long lasting performance. Non marking wheels and pivot/swivel neck for greater flexibility. The roller brush rotates at 6000 RPM, that's twice as fast as most power brushes providing your with far greater cleaning ability. Using double row chevron designed roller brushes that channels the air to draw the dirt from the outer edges of the roller brush into the center of the power head. Unlike other power brushes that require manual height adjustment the PowerMaxx Power Brush is self adjusting to most carpet surfaces. It has a forward mounted fluorescent headlight for better visibility under beds, in closets, and other dark areas. Not recommended for shag or high cut carpets.

Need a complete kit with hose and attachments? See our PowerMaxx Premier or PowerMaxx Deluxe Power Brush Kits part #CK304 or #CK300.

If you need a replacement belt see our part #PB615.

This is the original Ultra TP-210 power brush. Perfect for homes with limited carpet or area rugs. The power of the Ultra TP-210 (aka TurboCat, TL-2000 and TP-210) air turbine system is more than capable of handling your limited carpet and rug cleaning tasks. Try this system in your home today, you won't be disappointed!

Available in grey or black.

Need a complete kit with hose and attachments? See our Cen-Tec Deluxe Turbine Pack part #CK309.

If you need a replacement belt see our part #PB210.

Available in Black or Grey.

The AirMaxx Turbo Power Vacuum Brush is the most powerful and effective turbo brush available! It spins 24 blade turbine fan at an amazing 8000 RPM for maximum cleaning. This tool works great on stairs, upholstery, your carpet in the car and picks up dirt and pet hair with ease. Has the most powerful air turbine produced that spins at incredible speed that expedites any cleaning job you may have.

This turbine is driven by a cogged belt for secure non-slipping operation that is attached to a roller brush that is sealed away from dirt and debris that protects your belt from unnecessary exposure ensuring longer belt life.

It has a floating bottom plate that contours itself to your cleaning job as well as a rotating neck for side to side action to accommodate you cleaning needs. The bottom panel opens up for easy cleaning and maintenance. It's like having an upright vacuum cleaner in your hand!

Has a 6 1/2 inch wide cleaning path.

CLEANS BETTER THAN ANY OTHER AIR TURBINE TOOL AVAILABLE!

Factory replacement cogged belt for PowerMaxx Electric Power Brush. Fits Beam Serenity CV-30, Bosch, Wessel-Werk EBK340 and EBK360 power brush too. Fits all PowerMaxx power brushes.

Belt measures 3/8 inches wide and 4 1/2 inches long when flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

Factory replacement belt for the Cen-Tec CT14DXQD, CT18DXQD, CT18DXQS Series Power Brush and the Ace Electric Power Brush ^TM from MD Manufacturing^TM.

This is a smooth reinforced V-Grooved belt that wears exceptionally well and provides continuous power to your CT14 and CT18 Series Quietdrive Power Brush.

This belt measures 5/16 inch wide and 5 5/8 inches long when flattened out.

If your old belt is cogged and you need a replacement belt see our part #PB602.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

Factory replacement belt for the Cen-Tec CT12 Series Power Brush including the CT-12DX and the CT-12DXC.

This is a reinforced flat belt that wears exceptionally well and provides continuous power to your CT-12 Series Power Brush.

Belt measures 9/16 inches wide and 3 5/8 inches long when flattened out.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

Factory replacement belt for Thermax, Cen-Tec CT-110 and Black Hawk Power Brush.  This is a reinforced smooth belt that wears exceptionally well and provides continuous power.

Measures 3 inches long by 1/2 inches wide when flattened out and is smooth with no cogs.

For a replacement for the Black Hawk II power brush see our part #PB624.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

Factory replacement belt for TurboCat II, TurboCat Ultra TP-210, TurboCat TL-2000, and the TurboCat T-210 Air Turbine Brush. All belts for these systems are the same.

The belt measures 9/32" wide and 6 1/16 inches long and is cogged.

If you need a replacement belt for the TurboCat Zoom or TurboCat Zoom EX see our part #PB632.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

Factory replacement belt for Rug Rat air turbine tool. Also fits T21 and T22.

This belt measures 1/4" wide and 3-7/8 inches long when flattened out and is cogged.

Here is a hint:

Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.

SAVES ON SHIPPING COST TOO!

Factory replacement roller brush for PowerMaxx and Premier PowerMaxx Electric Power Brush. Also fits the Bosch, Beam Serenity and Wessel-Werk EBK340 power brush.

Measures 13 inches long.

It is highly advised that when you replace the roller brush you replace the belt for the best performance and life of the power brush.

To order a replacement belt see our part #PB615.

Factory replacement roller brush for the Thermax, Cen-Tec CT-110 Power Brush. Also fits MD Manufacturing's original Blackhawk power brush (has no headlight).

If you need a roller brush for the BlackHawk II that has a see through widow to the roller bar and a headlight, see our part #PB627.

It is highly advised that when you replace the roller brush you replace the belt for the best performance and life of the power brush.

To order the replacement belt see our part #PB601.

Factory replacement for Ultra TP210 Air turbine power heads.

This air turbine also fits the TL-2000, T210, Ultra TP210 and TurboCat systems.

Factory replacement elbow neck for Turbo Cat T-210. Also fits TurboCat, TL-2000 and TP-210. Does not include any other parts.

Available in grey or black. Grey is shown.

New factory replacement 120 volt motor for the PowerMaxx electric power brush. Also fit the Beam Serenity, Bosch Premium Electro Duo and Premium Prestige Series as well as the Wessel Works EB340 power brush. Fits all PowerMaxx power brushes too.

We suggest you also purchase a new replacement belt for longer life. To order a replacement belt see our part #PB615.

This is a factory 120 volt replacement 120 volt motor for the Cen-Tec CT-210 Series Electric Power brush.

We suggest you also purchase a new replacement belt for longer life. To order the replacement belt see our part #PB624.

This is a factory replacement light bulb for the Hayden 7500 Power Brush. Also fits most Cen-Tec power brushes including CT-12DXL, CT-14L, CT-14DX, CT-16DX, CT-18DXQD, CT-18DXQS, CT-20DXQD, and CT-20DXQS and Beam Rugmaster Plus.

Sold under many other brand names such as Hayden, VacuMaid, NuTone, M&S Systems, AirVac, Panasonic, Galaxie as well as other brands. Cen-Tec manufactures many of these power brushes for these central vacuum manufacturers. Look on the bottom of your power brush to see the manufacturer.