| |
|
Product Information |
Price |
| |
 |
Model #: PI300
Always use steel pipe and fittings in commercial applications and meets most fire codes (Please check with your local building or fire inspectors for regulations). Pipe is 2 inch outside diameter for central vacuum systems and is zinc coated carbon steel.
Sold by individual pieces so please state number of pieces required.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF400
Our steel 90 degree sweep "L" is designed to be used with all 2 inch outside diameter steel pipe. Use in all areas where a subtle 90 degree is needed.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF401
Use this steel fitting when installing commercial applications. One side fits 2 inch outside diameter pipe and the other directly into other fittings.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF405
Connects steel branch lines to the steel trunk line. Be sure the airflow direction is correct.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF402
Connects steel branch lines to the steel trunk line. Great for reducing the amount of turns and bends.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF403
Connects steel pipe to another steel fitting. Great for reducing the amount of turns and bends which assists airflow.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF406
Connects steel branch lines to the steel trunk line. Great for reducing the amount of turns and bends.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF404
Connects steel pipe to each other for a secure fit.
Use our Pliobond to secure to the steel pipe.
For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF411
Steel mounting plate for commercial applicationsor any steel pipe applications. For use with all steel pipe, fittings and low voltage valves. |
|
|
| |
 |
Model #: PF409
Steel square flange.
Use our Pliobond to secure to the steel pipe. For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF407
THIS IS A SAFETY MUST FOR ALL CENTRAL VACUUM INSTALLATIONS!
This 3MTMPipe Fire Barrier is to be used on PVC, ABS, and CPVC pipe to limit or stop fire intrusion. This meets some states requirements for fire protection through firewalls. When heated the PVC pipe and wire expands quickly up to 60 times it's size to seal off the fire.
UL classified and FM approved. Water resistant and safe for contact with plastics.
|
|
|
| |
 |
Model #: PF408
Used in the firewall to assist in the prevention of flames spreading. We recommend this highly in your installation. This firewall pipe is 2 inches in diameter and is available in 6 inch lengths.
It is best to also use one of our fire barriers to enhance your fire protection.
To see our fire barrier collars see part #PF407 or #PF412.
Use our Pliobond to secure this to the vacuum pipe. For Pliobond see our part number #IS305. |
|
|
| |
 |
Model #: PF410
This 2 inch Steel Pipe Sleeve is a short length of heat-shrink tubing that can be used to seal two lengths of central vacuum steel tubing together for a tight fit.
THIS IS THE ONLY THING TO USE TO GET A SECURE AND SNUG FIT! |
|
|
