| |
|
Product Information |
Price |
| |
 |
Model #: KB300
This is the Kirby Genuine Power Nozzle Belt for the Generation 3, 4, 5, 6, Ultimate G, Diamond Edition, and Sentria Uprights.
Belt is knurled (criss cross pattern on inside of belt) to provide better traction on the brush roll and the motor shaft.
Also will fit the Kirby Legend Series and Kirby Heritage Series Upright Vacuums.
This belt will replace the standard SMOOTH flat belt the Kirby Generation Series Uprights. |
|
|
| |
 |
Model #: KB305
This is the Genuine Kirby Power Drive Belt for the Kirby Generation Series, Ultimate G, and Diamond Edition upright vacuums that are equipped with the Power Drive Feature.
For the Kirby Power Nozzle Belt, please see our part #KB300
Sold 1 per pack
|
|
|
| |
 |
Model #: PB615
Factory replacement cogged belt for PowerMaxx Electric Power Brush. Fits Beam Serenity CV-30, Bosch, Wessel-Werk EBK340 and EBK360 power brush too. Fits all PowerMaxx power brushes.
Belt measures 3/8 inches wide and 4 1/2 inches long when flattened out.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB661
Factory replacement belt for the Cen-Tec CT24QD Power Brush. This is a reinforced V-Grooved belt that wears exceptionally well and provides continuous power to your CT-24 Series Quietdrive Power Brush.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
|
Model #: PB621
Factory replacement belt for the Cen-Tec CT20DXQD or CT20DXQS Series Power Brush. This is a reinforced V-Grooved belt that wears exceptionally well and provides continuous power to your CT-20 Series Quietdrive Power Brush.
Belt measures 5/16 inches wide by 5 1/4 inches long flattened out.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB622
Factory replacement belt for the Cen-Tec CT14DXQD, CT18DXQD, CT18DXQS Series Power Brush and the Ace Electric Power Brush TM from MD ManufacturingTM.
This is a smooth reinforced V-Grooved belt that wears exceptionally well and provides continuous power to your CT14 and CT18 Series Quietdrive Power Brush.
This belt measures 5/16 inch wide and 5 5/8 inches long when flattened out.
If your old belt is cogged and you need a replacement belt see our part #PB602.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB602
Factory replacement belt for Hayden SuperPack HM 7500 (HAY300 and HAY203), Cen-Tec CT14, CT16, and CT18 Series or Panasonic power brushes with a cogged belt.
Fits only brush roll style with cogged belt.
Many Cen-Tec products were sold under the name brands AirVac, Beam, Galaxie, Nutone, M & S, Panasonic, Vacuflo Electroglide, Vacumaid and Whirlpool as well as many others. To check look on the bottom of your power brush for the name of the manufacturer.
This cogged belt measures 5/16" wide, 5 3/4" long when flattened out.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB623
Factory replacement belt for the Cen-Tec CT12 Series Power Brush including the CT-12DX and the CT-12DXC.
This is a reinforced flat belt that wears exceptionally well and provides continuous power to your CT-12 Series Power Brush.
Belt measures 9/16 inches wide and 3 5/8 inches long when flattened out.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB624
THESE BELT ARE IN LIMITED INVENTORY SO BUY THEM NOW AS THEY ARE NO LONGER MADE!
Factory replacement belt for the Cen-Tec CT210 Series Power Brush as well as the new 12 inch Blackhawk II power brush from MD Manufacturing TM that has a see through window to the roller bar and a headlight. Also fits some Air Vac models. This is a reinforced flat belt that wears exceptionally well and provides continuous power to your CT-210 Series Power Brush.
Belt measures 5/8 inches wide and 3 3/4 inches long when flattened out.
For belts to the original model of the Black Hawk power brush with no headlight by MD Manufacturing see our part #PB601.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO!
|
|
|
| |
 |
Model #: PB601
Factory replacement belt for Thermax, Cen-Tec CT-110 and Black Hawk Power Brush. This is a reinforced smooth belt that wears exceptionally well and provides continuous power.
Measures 3 inches long by 1/2 inches wide when flattened out and is smooth with no cogs.
For a replacement for the Black Hawk II power brush see our part #PB624.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB656
This is a factory replacement belt for a Bosch Electro Duo #435395 electric power brush that is available on the Formula and Premiere Series Canisters.
The Bosch Duo #435395 Power Nozzle is no longer available.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB635
This factory cogged belt fits the Dust Care PB11 power nozzle and the MD Manufacturing Blackhawk 12 inch power nozzle.
These fit the Dust Care PB11 that were made AFTER 06/11/07 that require a cogged style belt.
Measures 4 3/16 inches long when flattened out and is 3/16 inches wide.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO!
|
|
|
| |
 |
Model #: PB629
This smooth, flat belt (no cogs) that measures 5/8 of an inch wide and 3 3/4 inches long when flattened out.
This fits the Beam Rugmaster, Rugmaster Plus, Beam Classic II, Eureka CV1373 and Eureka Elite, Rexair Rainbow, and Frigidaire Gallery, Nutone Models 398, 598, 599 power brush as well as many other power brushes that use this size flat belt. Replaces the Eureka belt # 52201A.
If you need a replacement cogged belt instead for this power brush see our part #PB631.
To view the power brush this fits on see our part #PB412.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO!
|
|
|
| |
 |
Model #: PB657
The is a factory replacment belt for the EdgLift, ESSCO, and UltraLift power brushes.
Belt measures 5 1/4" long when flattened out and is 1/4" wide.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO!
|
|
|
| |
 |
Model #: PB641
This flat smooth belt fits all Filter Queen Power Brushes.
Measures 4.25 inches when flattened out and 7/16 inches wide.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB631
This cogged belt measures 1/4 of an inch wide and 4 1/4 inches long when flattened out. This fits the Beam Rugmaster power brush as well as many Eureka Power brushes that use this size cogged belt. Replaces the Eureka belt # 6952AC.
If you need a replacement flat belt for this power brush instead see our part #belt #PB629.
To view the power brush this fits on see our part #PB412.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO!
|
|
|
| |
|
Model #: PB603
Factory replacement belt for Wessel-Werk EBK290 and Eagle Power Brush from MD Manufacturing.
This belt is cogged and measures 7/32" wide and 4 inches wide flattened out.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
|
Model #: PB632
This is a factory replacement V-belt for the TurboCat Zoom and the TurboCat Zoom EX. This is a smooth belt with small "V" grooves in it and is not a cogged belt.
Belt measures 5/16 inches wide and 5 9/16 inches when flattened out.
If you need a replacement belt for the TurboCat TP-210 that is cogged see our part #PB210.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
|
Model #: PB658
This is a factory replacement belt for the Cen-Tec CPB-100, Riccar, Simplicity and Miele power brushes.
Has printed on the belt #B350-2514.
Belt measures 3/8 of an inch wide and 4 3/8 of and inch long when flattened out.
Also fits the Riccar, Simplicity, Meile as well. |
|
|
| |
 |
Model #: PB210
Factory replacement belt for TurboCat II, TurboCat Ultra TP-210, TurboCat TL-2000, and the TurboCat T-210 Air Turbine Brush. All belts for these systems are the same.
The belt measures 9/32" wide and 6 1/16 inches long and is cogged.
If you need a replacement belt for the TurboCat Zoom or TurboCat Zoom EX see our part #PB632.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB201
Factory replacement belt for TT27, TK270, TT270, Wessel-Werk 2700 or Meile Turbo air turbine carpet brush.
Belt measures 5/32" wide and 4 3/8" long and is cogged.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB204
Factory replacement belt for Rug Rat air turbine tool. Also fits T21 and T22.
This belt measures 1/4" wide and 3-7/8 inches long when flattened out and is cogged.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
 |
Model #: PB200
Factory replacement belt for the TK2, TK4 and the TT132 that measures 3/16" wide and 4 5/16" long when flattened out and is cogged.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO!
|
|
|
| |
 |
Model #: PB644
This is a factory replacement belt for the Beam Butler Power Brush. This also may fit models BM1197A, E10071 and 6189.
Belt measures 5/8 inches wide and 3 3/4 inches long when flattened out.
If you need a replacement roller brush please our part #PB643.
Comes 2 per pack.
|
|
|
| |
|
Model #: PB645
This is a factory replacement belt for the ProTeam 15 and ProTeam 15XP upright vacuums.
This belt is cogged and measures 5 inches long when flattened out and 3/8 inches wide.
Here is a hint:
Buy two and store the second belt in the bottom of your vacuum for future needs! When the belt breaks once again you will never need to search for a new belt or wait for a replacement to be shipped to you.
SAVES ON SHIPPING COST TOO! |
|
|
| |
|
Model #: PB663
Genuine factory replacement belt for all of the Cirrus Series upright vacuums. Includes models CR68, CR78, CR88, CR67-C and CR77-C.
Belt measures 8 inches long when flattened out and 1/2" wide.
Comes TWO per pack! |
|
|
